Double-layer glass electric vacuum reactor
Contact Info
- Add:No. 4285, Shendu Highway, Pujiang Town, Zip: 200000
- Contact: 胡工
- Tel:18001633556
- Email:15000845544@163.com
Other Products
Double-Layer Glass Electric Vacuum Reactor
Product Introduction:
The double-layer glass electric vacuum reactor is equipped with an electric constant-speed stirring system, a condensation system, and a dropping system. The interlayer of the reactor body needs to be connected to an external heating or cooling circulation device. While stirring the materials, circulating hot solution or cooling liquid is injected through the interlayer to heat or cool the materials in the reactor at a constant temperature. When the materials undergo heating reaction, the evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). When the solvent vapor passes through the glass condensation coil, it is cooled into liquid (a cooling device needs to be connected), which can flow back into the reactor or be recovered through the valve at the lower part of the reflux elbow. After the reaction is completed, the materials can be discharged from the side outlet at the bottom of the reactor.
This series of products needs to be matched with a vacuum device, a high-temperature or low-temperature circulation device, etc. to form a complete system device.
Technical Parameters:
Product Name: 20L Three-Layer Jacketed Stainless Steel/Glass Reactor
Material of inner reactor body: 316L stainless steel
Material of non-wetted reactor body: 304
Material of reactor cover: 316L
Reactor design: Sealed reactor that can withstand vacuum and positive pressure
Wall thickness of inner reactor jacket: 5mm
Inner reactor jacket: Can use water bath or oil bath
Outer reactor jacket: Insulation layer
Jacket inlet and outlet: DN25 quick-connect joint
Designed total volume: 26L
Effective volume: 20L
Reactor body structure: Upper and lower head structure
Reactor cover openings: Vacuum pressure gauge, sight glass with scraper, feed inlet with filter, feeding hopper, vacuum breaking respirator, spray ball, sight glass (with internal lighting)
Internal reactor structure: Frame-type wall-scraping stirring, stirring power 400W, rotation speed 0-63r/min, scraper made of integral PTFE Class A scraper, speed regulated by Taiwan Delta frequency converter;
Reactor cover connection method: Four-side locking buckle pairing
Reactor bottom structure: Bottom-mounted disperser
Homogenizer: Bottom-mounted, power: 2.2KW, rotation speed: 0-3600r/min, bimetallic water-circulating mechanical seal
Temperature measurement component: PT100 temperature probe
Discharge method: Tipping discharge
Reactor cover lifting method: Electric hydraulic lifting
Lifter material: 304
Lifting column material: 304
Product Features:
The equipment adopts a highly modular design, with various systems available for optional installation
High-speed motor, long-life design, stable operation
The whole machine has a reasonable structural design and is made of high-quality materials,
Stepless speed regulation, with a shear linear speed of 27m/s
Suitable for different working environments (sealed, open, atmospheric pressure, vacuum)
Overload protection and double-layer insulation provide safety assurance
The working head is made of stainless steel, reusable, and meets GMP hygiene standards
The equipment has a modular design, allowing flexible combination of any systems. You can freely add other customized functions you need.
Product Parameters:
Model: | YK-20L |
Power Supply: | 220V/50/60Hz |
Stirring Volume: | 8~20L |
Processing Capacity: | 10~20L |
Working Temperature: | 120°C (high temperature optional) |
Heating Method: | Water bath (or oil bath) circulation |
Vacuum Level: | -0.096Mpa (positive pressure optional) |
Processing Viscosity: | 70000CP (130000CP ultra-high viscosity optional) |
Stirrer Power: | 180W |
Stirrer Rotation Speed: | 0~200rpm (ultra-high rotation speed optional) |
Impeller Configuration: | Anchor-type wall-scraping stirring impeller |
Emulsifying Homogenizer Power: | 1500W |
Emulsifying Homogenizer Rotation Speed: | 300~6000rpm |
Emulsifying Working Head Model: | 60DG |
Support Lifting Method: | Electric lifting |
Support Lifting Stroke: | 400mm |
Material-Contacting Material: | SUS316L stainless steel, scraper can be PTFE or silicone |
Reactor Body Material: | Borosilicate glass jacketed container (SUS316L stainless steel container is also optional) |
Weight: | 100KG |
Packaging: | Wooden case |
| Industry Category | Chemicals/Reaction Equipment/Reactors |
|---|---|
| Product Category | |
| Brand: | 约迪（YULDOR） |
| Spec: | YK-20L |
| Stock: | 10 |
| Origin: | 113112 |
